here we go with the pix of the new Delrin battery tray. It's just a quick done thing for try out if I'm happy with that. After 15 packs yesterday it seems to be the way to go for me: regards Dani
here some more pix with the battery on it: straight on: fully left steering: fully right steering: and from top: I'm in contact with Erik (D-Lux) and hope he is making something like this, his upper link mount is perfect for fixing the battery mount :yes3:
got some skinz! Thanks for this amazing and superfast service, Michelle. Krawler Konceptz makes crawler dreams come true
Yep, Michelle always do a great and fast services :yeah3: :yeah3: One week left right now before ..... :twisted: :twisted:
:yes3: :yes3: :mdr3: Yesterday was the maiden run outdoor and I was surprised how good the Indoor made setup was working. Some small changes but all in all she's ready for the first little comp this weekend. I know that you prefer pics than words, so I made a short vid, enjoy it: regards Dani
Exellent this next movie Nico... There's a proverb who says : 1 little draw (or 1 pic) can show you more than million words :yesintel3: ENJOY..... :yesd3:
So you can expect a new one vid from my rides at the Nordics2012: stay tuned, I'll be ready in a couple of days... Also with some small setup changes :blerp3:
In English : pfiiiiiioooouuuuuu In french : pfiiiiiioooouuuuuu I have the same chassis in expectation of montage can you tell me where to find this piece :roll: Thanks and very good job
those parts are homemade by Crawler-Halle, like all the Alu spacers. Perhaps I can help, let me know what sizes you need (depends to your setup) and take care that you have spacers between all shocks and links too. Better for the chassis :yes3: here some updates, pix and a short vid from last sundays setup and practice runs for the US Nats: frist some pix from Swiss Nats at Furka: she did very well for me at the Swiss Nats. We had some rather good international drivers with us so I was happy to made the Top 8 after the 6 courses on day 1 and ended on 6th place after finals. I gave the shaved rovers a try and they work well. Have to try them in the practice for the Nats. Some of my favourite pix from the last weekend: and then some actual updates during the revision... time to make a soft revision of my Switch/Berg with some slightly upgrades so it'll be ready for the Nats soon. I received some hot stuff from Erik D-Lux... so I disassembled my rear axle, controlled, cleaned and dieted (a bit more) the gears, changed the bearings. Drilling the tubes on the 19/64 needed for the 7075 shafts will help to loose another 3.7 gramms 8) like the new hexes: the Hulk Ti shafts on the scale: and the D-Lux 7075 with everything needed: not the big deal but another 4.7 gramms less... after assembling all the stuff ready to go again: that's with lightweight hardware (Ti / Alu), lightend gears, lighter bearings, D-Lux Delrin tubes (drilled out to 7.5 mm), D-Lux AL 7075 shaft's and D-Lux upper link mount in CF. Guess that's it with standard motors (Brood Creep HHK 35 T). will go ahead with the soft revision this night... and a short vid from last weekend:
